LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2005 >> Avalon XLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Smart Key System (Keyless Entry) >> Luggage Compartment Open Switch Circuit >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. INSPECT LUGGAGE COMPARTMENT OPEN SWITCH 
    1. Disconnect the switch connector.
    2. Measure the resistance according to the value (s) in the table below.

      Standard: 

      LUGGAGE COMPARTMENT OPEN SWITCH RESISTANCE

      Tester Connection Condition Specified Condition
      L23-1 - L23-2 Luggage compartment open switch not pushed --> Pushed 10 kΩ or higher --> Below 1 Ω
      Fig 1: Inspecting Luggage Compartment Open Switch
      G02977187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG : REPLACE LUGGAGE COMPARTMENT OPEN SWITCH 
    2. OK : Go to next step. 
  2. CHECK WIRE HARNESS (CERTIFICATION ECU - LUGGAGE COMPARTMENT OPEN SWITCH) 
    1. Reconnect the switch connector.
    2. Disconnect the D39 ECU connector.
    3. Measure the resistance according to the value (s) in the table below.

      Standard: 

      CERTIFICATION ECU - LUGGAGE COMPARTMENT OPEN SWITCH RESISTANCE

      Tester Connection Condition Specified Condition
      TSW5 (D39-7) - Body ground Luggage compartment open switch not pushed --> Pushed 10 kΩ or higher --> Below 1 Ω
      Fig 2: Disconnecting D39 Certification ECU Connector
      G02977188Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG : REPAIR OR REPLACE WIRE HARNESS OR CONNECTOR 
    2. OK : PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE  
scientia non olet · About LEMON Manuals