Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present | See LIST OF DISABLE A MONITOR |
| Engine condition | Running |
| Time after engine start | 2 minutes or more |
| Vehicle speed | 25 mph (40 km/h) or more (Driving for 20 seconds) |
| Fuel system status | Closed-loop |
| Idle | OFF (for 2 seconds or more) |
| Engine RPM | 1,400 to 3,200 RPM |
| Vehicle speed | 37.5 to 75 mph (60 to 120 km/h) |
| Fuel-cut | OFF (for 2 seconds or more) |
| Malfunction determination in this driving cycle | Not yet |