Accelerator Pedal ASSY (1MZ-FE/3MZ-FE): Replacement

REMOVE ACCELERATOR PEDAL ASSY
1. Disconnect the accelerator position sensor connector.
2. Remove the 2 bolts and the accelerator pedal.
  
  Fig 1: Removing Bolts And Accelerator Pedal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ACCELERATOR PEDAL ASSY
1. Connect the accelerator position sensor connector.
2. Install the accelerator pedal with the 2 bolts.
  Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
  
  Fig 2: Installing Accelerator Pedal With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002