LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2005 >> Camry Base, Standard >> Repair and Diagnosis >> General Information >> OEM General Information >> Service Specifications >> Front Suspension >> Service Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Data

Front Suspension Service Data

Front wheel alignment Vehicle height  
1MZ-FE COMFORT Front: A - B 120 mm (4.72 in.)
  Rear: D - C 46 mm (1.81 in.)
1MZ-FE PREMIUM (USA, Canada) Front: A - B 119 mm (4.69 in.)
  Rear: D - C 47 mm (1.85 in.)
1MZ-FE PREMIUM (Mexico) Front: A - B 106 mm (4.17 in.)
    (1) 101 mm (3.98 in.)
  Rear: D - C 33 mm (1.30 in.)
    (1) 25 mm (0.98 in.)
3MZ-FE SPORT Front: A - B 120 mm (4.72 in.)
  Rear: D - C 48 mm (1.89 in.)
2AZ-FE COMFORT (USA, Canada) Front: A - B 119 mm (4.69 in.)
  Rear: D - C 45 mm (1.77 in.)
2AZ-FE COMFORT (Mexico) Front: A - B 106 mm (4.17 in.)
    (1) 101 mm (3.98 in.)
  Rear: D - C 33 mm (1.30 in.)
    (1) 25 mm (0.98 in.)
2AZ-FE PREMIUM Front: A-B 120 mm (4.72 in.)
  Rear: D - C 45 mm (1.77 in.)
2AZ-FE SPORT Front: A - B 120 mm (4.72 in.)
  Rear: D - C 48 mm (1.89 in.)
Toe-in (total)   0° ± 12' (0° ± 0.2° 0 ± 2 mm, 0 ± 0.08 in.)
  Rack end length difference 1.5 mm (0.059 in.) or less
Wheel angle    
15 inch (USA, Canada) Inside wheel 39°04' ± 2° (39.07° ± 2°)
  Outside wheel: Reference 33° 44' (33.73°)
15 inch (Mexico) Inside wheel 39°30' ± 2° (39.50° ± 2°)
  Outside wheel: Reference 34° 02' (34.03°)
16 inch (USA, Canada) Inside wheel 36°39' ± 2° (36.65° ± 2°)
  Outside wheel: Reference 32° 11' (32.18°)
16 inch (Mexico) Inside wheel 37°00' ± 2° (37.00° ± 2°)
  Outside wheel: Reference 32° 28' (32.47°)
Camber USA, Canada: -0°43' ± 45' (-0.72° ± 0.75°)
  Mexico: -0° 33' ± 45' (-0.55° ± 0.75°)
  Right-left error 45' (0.75°) or less
Caster    
3MZ-FE   2°39' ± 45' (2.65° ± 0.75°)
1MZ-FE Except SPORT (USA, Canada)   2°37' ± 45' (2.62° ± 0.75°)
1MZ-FE Except SPORT (Mexico)   2°33' ± 45' (2.55° ± 0.75°)
2AZ-FE SPORT   2°43' ± 45' (2.72° ± 0.75°)
2AZ-FE Except SPORT (USA, Canada)   2°39' ± 45' (2.65° ± 0.75°)
2AZ-FE Except SPORT (Mexico)   2°36' ± 45' (2.60° ± 0.75°)
  Right-left error 45' (0.75°) or less
Steering axis inclination USA, Canada: 11°27' ± 45' (11.45° ± 0.75°)
  Mexico: 11°05' ± 45' (11.08° ± 0.75°)
  Right-left error 45' (0.75°) or less
Front suspension Lower ball joint turning torque 0.98 -- 3.43 N.m (10 -- 35 kgf.cm, 8.7 -- 30 in..lbf)
Stabilizer bar link ball joint turning torque 0.05 -- 1.96 N.m (0.5 -- 20 kgf.cm, 0.4 -- 17.4 in..lbf)
A: Ground clearance of front wheel center 
B: Ground clearance of lower suspension arm No. 2 set bolt center 
C: Ground clearance of strut rod set bolt center 
D: Ground clearance of rear wheel center 
(1) HI UP 

A: Ground clearance of front wheel center 

B: Ground clearance of lower suspension arm No. 2 set bolt center 

C: Ground clearance of strut rod set bolt center 

D: Ground clearance of rear wheel center 

*1  : HI UP