Torque Specification
POWER STEERING TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| POWER STEERING VANE PUMP (2AZ-FE) | |||
| Vane pump housing rear x Vane pump housing front | 22 | 224 | 16 |
| Pressure port union | 69 | 704 | 51 |
| Power steering suction port union set bolt | 12 | 122 | 9 |
| Power steering oil pressure switch | 21 | 214 | 15 |
| Pressure feed tube assy x Vane pump assy | 51.5 | 525 | 38 |
| Vane pump assy set bolt Bolt A | 30 (43) | 306 (440) | 22 (32) |
| Vane pump assy set bolt Bolt B | 43 | 440 | 32 |
| POWER STEERING VANE PUMP (1MZ-FE/3MZ-FE) | |||
| Vane pump housing rear x Vane pump housing front | 24 | 245 | 18 |
| Pressure port union | 83 | 846 | 61 |
| Power steering suction port union set bolt | 13 | 133 | 10 |
| Pump bracket front x Vane pump bracket rear (TYPE A VANE PUMP) | 43 | 438 | 32 |
| Pump bracket front x Vane pump bracket rear (TYPE B VANE PUMP) | 44 | 449 | 32 |
| Vane pump pulley set nut (TYPE A VANE PUMP) | 44 | 449 | 32 |
| Vane pump assy set bolt | 43 | 438 | 32 |
| Pressure feed tube assy x Vane pump assy | 51.5 | 525 | 38 |
| Power steering oil pressure switch | 21 | 214 | 15 |
| POWER STEERING GEAR | |||
| Control valve housing set bolt | 21 | 214 | 15 |
| Control valve shaft lock nut | 24.5 | 250 | 18 |
| Rack housing cap | 58.5 | 597 | 43 |
| Rack guide spring cap nut | 48 (68.5) | 489 (699) | 35 (51) |
| Power steering rack x Steering rack end sub-assy | 58.5 (83.5) | 597 (851) | 43 (62) |
| Tie rod assy lock nut | 74 | 755 | 55 |
| Turn pressure tube union nut | 11.5 (12.5) | 117 (127) | 8 (9) |
| Rack & pinion power steering gear assy set bolt and nut | 70 | 714 | 52 |
| Pressure feed and return tubes x Control valve housing | 22.5 (24.5) | 229 (250) | 17 (18) |
| Pressure feed tube clamp set bolt | 9.8 | 100 | 86 in...lbf |
| Return tube assy clamp set nut | 9.8 | 100 | 86 in...lbf |
| Front stabilizer bracket | 19 | 194 | 14 |
| Stabilizer link assy set nut | 74 | 755 | 55 |
| Tie rod assy set nut | 49 | 500 | 36 |
| Intermediate shaft sub-assy x Control valve | 35.3 | 360 | 26 |
| Hub nut | 103 | 1,050 | 76 |
( ): For use without SST