Service Data
2AZ-FE:
STARTING AND CHARGING SERVICE DATA (2AZ-FE)
| Starter assy | |
| Specified current | 90 A or less at 11.5 V |
| Starter relay | |
| Specified condition 3-5 | 10 kΩ or higher |
| Specified condition 3-5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| Starter armature assy | |
| Depth Standard | 3.1 mm (0.122 in.) |
| Depth Maximum | 3.8 mm (0.150 in.) |
| Starter commutator end frame assy | |
| Brush length Standard | 9.0 mm (0.354 in.) |
| Brush length Minimum | 4.0 mm (0.158 in.) |
| Magnetic switch resistance Terminal 50 - C | Below 1 Ω |
| Magnetic switch resistance Terminal 50 - Switch body | Below 2 Ω |
| Starter armature resistance Segments | Below 1 Ω |
| Starter armature resistance Commutator - Coil core | 10 kΩ or higher |
| Voltage regulator Regulating voltage | 13.2 to 14.8 V |
| Voltage regulator Standard amperage | 10 A or less |
| Generator brush holder assy | |
| Brush length Standard | 10.5 mm (0.413 in.) |
| Brush length Minimum | 4.5 mm (0.177 in.) |
| Generator rotor assy | |
| Open circuit Resistance | 2.3 to 2.7 ° at 20°C (68°F) |
| Slip ring diameter Standard | 14.2 to 14.4 mm (0.559 to 0.567 in.) |
| Slip ring diameter Minimum | 14.0 mm (0.551 in.) |
1MZ-FE/3MZ-FE:
STARTING AND CHARGING SERVICE DATA (1MZ-FE/3MZ-FE)
| Starter assy | |
| Specified current | 90 A or less at 11.5 V |
| Starter relay | |
| Specified condition 3-5 | 10 kΩ or higher |
| Specified condition 3-5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| Starter armature assy | |
| Depth Standard | 3.1 mm (0.122 in.) |
| Depth Maximum | 3.8 mm (0.150 in.) |
| Starter commutator end frame assy | |
| Brush length Standard | 9.0 mm (0.354 in.) |
| Brush length Minimum | 4.0 mm (0.158 in.) |
| Magnetic switch resistance Terminal 50 - C | Below 1 Ω |
| Magnetic switch resistance Terminal 50 - Switch body | Below 2 Ω |
| Starter armature resistance Segments | Below 1 Ω |
| Starter armature resistance Commutator - Coil core | 10 kΩ or higher |
| Voltage regulator Regulating voltage | 13.2 to 14.8 V |
| Voltage regulator Standard amperage | 10 A or less |
| Generator brush holder assy | |
| Brush length Standard | 10.5 mm (0.413 in.) |
| Brush length Minimum | 4.5 mm (0.177 in.) |
| Generator rotor assy | |
| Open circuit Resistance | 2.3 to 2.7 ° at 20°C (68°F) |
| Slip ring diameter Standard | 14.2 to 14.4 mm (0.559 to 0.567 in.) |
| Slip ring diameter Minimum | 14.0 mm (0.551 in.) |