Torque Specifications

TORQUE SPECIFICATIONS

Part tightened	N.m	kgf.cm	ft.lbf
POWER STEERING VANE PUMP
Vane pump housing rear at Vane pump housing front	22	224	16
Pressure port union	69	704	51
Suction port union set bolt	12	122	9
Oil pressure switch	21	214	16
Vane pump assy at Vane pump bracket rear	37	377	27
Vane pump assy set bolt	37	377	27
Pressure feed tube assy at Vane pump assy	41 (44)	418 (450)	30 (33)
Pressure feed tube assy clamp set bolt	7.8	80	69 in.lbf
POWER STEERING GEAR
Engine hanger set bolt	38	390	28
Control valve housing set bolt	18	184	13
Rack housing cap nut	25	250	18
Rack housing cap	59	602	44
Rack guide spring cap nut	42 (59)	428 (602)	31 (44)
Power steering rack at Rack end sub-assy	60 (83)	614 (850)	44 (62)
Tie rod end sub-assy lock nut	74	755	55
Turn pressure tube union nut	12 (13)	120 (130)	9 (9)
Rack & pinion power steering gear assy set bolt	58	591	43
Pressure feed tube assy at Control valve housing	23 (25)	229 (250)	17 (18)
Pressure feed tube clamp set bolt	7.8	80	69 in.lbf
Stabilizer link assy set nut	74	755	55
Tie rod end sub-assy at Steering knuckle	49	500	36
Intermediate shaft assy No. 2 at Steering intermediate shaft	35	360	26
Steering intermediate shaft at Control valve pinion shaft	35	360	26
Front suspension crossmember sub-assy at Frame Bolt A	157	1, 600	116
Front suspension crossmember sub-assy at Frame Bolt B	113	1, 152	83
Center member at Frame NUMMI/TMMCmade	69	612	44
Center member at Frame TMC made	39	398	29
Center member at Engine mounting insulator FR	52	530	38
Crossmember at Engine mounting insulator RR	52	530	38
Exhaust pipe assy front set bolts	43	440	32
Front suspension arm sub-assy lower No. 1 at Lower ball joint	89	908	66
Front wheel hub nut	103	1, 050	76

():For use without SST