October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Removal

REMOVE ENGINE UNDER COVER RH
REMOVE CRANKSHAFT POSITION SENSOR
1. While sliding the connector lock, remove the connector.
2. Remove the bolt and crankshaft position sensor.
  Torque: 7.5 N.m (76 kgf.cm, 66 in..lbf)
Fig 1: Removing Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002