Torque Specification

TIGHTENING TORQUE SPECIFICATION TABLE - CHARGING

Part tightened		N.m	kgf.cm	ft.lbf
Generator x Cylinder block	Bolt	39	400	29
	for nut A	39	440	29
	for nut B	15.5	158	11
Generator Wiew x Generator		9.8	100	87 in..lbf
PS Vane Pump x Vane Pump Bracket		17	175	13
Radiator Assembly x Body		20	200	15
Fan Shroud x Radiator Assembly		5.0	50	43 in..lbf
Bearing retainer x Drive end frame		2.3	23	20 in..lbf
Rectifier end frame x Drive end frame		5.8	59	51 in..lbf
Generator pulley x Rotor		110.3	1,125	81
Brush holder x Rectifier end frame		1.8	18	16 in..lbf
Rear end cover x Rectifier end frame		4.6	47	41 in..lbf