Service Data
SERVICE SPECIFICATIONS TABLE - STEERING
| POWER STEERING FLUID | |||
| Oil level rise | Maximum | Below 5 mm (0.20 in.) | |
| Oil pressure at idle speed with valve closed | Minimum | 10,000 kPa (102 kgf/cm2 , 1,451 psi) | |
| STEERING WHEEL | |||
| Steering wheel freeplay | Maximum | 40 mm (1.58 in.) | |
| Steering effort at idle speed | Maximum | 4.9 N.m (50 kgf.cm, 43 in..lbf) | |
| PS VANE PUMP | |||
| Pump shaft and front housing bushing oil clearance | STD | 0.021 - 0.043 mm (0.00083 - 0.00169 in.) | |
| Maximum | 0.070 mm (0.00276 in.) | ||
| Pump shaft and rear housing bushing oil clearance | STD | 0.020 - 0.077 mm (0.00079 - 0.00303 in.) | |
| Maximum | 0.080 mm (0.00315 in.) | ||
| Vane plate thickness | Minimum | 1.405 mm (0.0531 in.) | |
| Vane plate and pump rotor groove clearance | Maximum | 0.03 mm (0.0012 in.) | |
| Flow control valve spring length | Minimum | 31.3 mm (1.2323 in.) | |
| Pump rotating torque | Maximum | 0.28 N.m (2.8 kgf.cm, 2.4 in..lbf) or less | |
| PS GEAR | |||
| Steering rack runout | Maximum | 0.03 mm (0.0118 in.) | |
| Total preload | Center area | 1.8-2.2 N.m (18.4-22.4 kgf.cm, 16.0-19.5 in..lbf) | |
| End area | 1.3-1.7 N.m (13.3-17.3 kgf.cm, 11.5-15.0 in..lbf) | ||