Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS (DTC P2A00)
| Monitor runs whenever following DTCs not present | See LIST OF DISABLE A MONITOR |
| Engine condition | Running |
| Time after engine start | 2 minutes or more |
| Duration that vehicle has been driven under following conditions A and B | 20 seconds or more |
| A. Vehicle speed | 25 mph (40 km/h) or more |
| B. Engine RPM | 900 RPM or more |
| Fuel system status | Closed-loop |
| A/F sensor status | Activated |
| Idling | OFF (for 2 seconds or more) |
| Engine RPM | 1,400 to 3,200 RPM |
| Vehicle speed | 37.5 to 75 mph (60 to 120 km/h) |
| Fuel-cut | OFF (for 2 seconds or more) |
| Malfunction determination in this driving cycle | Not yet |