Circuit Description
DTC B1785 is output when the occupant classification ECU receives a collision detection signal sent by the occupant classification sensor front LH if an accident occurs.
DTC B1785 is also output when the front seat W/adjuster frame assy RH is subjected to a strong impact, even if an actual accident does not occur.
However, when the occupant classification ECU outputs a collision detection signal, even if the vehicle is not in a collision, DTC B1785 can be cleared by "Zero point calibration" and "Sensitivity check".
Therefore, if DTC B1785 is output, first perform "Zero point calibration" and "Sensitivity check".
HINT:
When DTC B1650/32 is detected as a result of troubleshooting for the supplemental restraint system, perform troubleshooting for DTC B1785 of the passenger occupant classification system.
Use the hand-held tester to check the DTC of the occupant classification ECU, otherwise the DTC cannot be read.