Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
P0031 and P0037:
TYPICAL ENABLING CONDITIONS CHART (P0031 AND P0037)
| Monitor runs whenever following DTCs not present | See LIST OF DISABLE A MONITOR |
| Either of following conditions A or B met: | - |
| Conditions A | - |
| Time after engine start | 250 to 500 seconds |
| Vehicle speed | Below 60 mph (90 km/h) |
| Battery voltage | 10.5 V or more |
| Pass or Fail detection in this driving cycle | None |
| Conditions B | - |
| Time after engine start | 500 seconds or more |
| Vehicle speed | 25 mph (40 km/h) or more |
| Battery voltage | 10.5 V or more |
| Pass or Fail detection in this driving cycle | None |
P0032 and P0038:
TYPICAL ENABLING CONDITIONS CHART (P0032 AND P0038)
| Monitor runs whenever following DTCs not present | See LIST OF DISABLE A MONITOR |