Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
Misfire:
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | See LIST OF DISABLE A MONITOR |
| Battery voltage | 8 V or more |
| Throttle position learning | Completed |
| VVT system | No operate by scan tool |
| Engine RPM | 450 to 6,700 rpm |
| All of following conditions A and B met | - |
| A. Engine Coolant Temperature (ECT) | -10°C (14°F) or more |
| B. Either of following conditions 1 or 2 met | - |
| 1. ECT at engine start | More than -7°C (19°F) |
| 2. ECT | More than 20°C (68°F) |
| Intake air amount per crankshaft revolution (vary with engine RPM) | 0.141 g/rev or more (at 1,600 rpm) |