Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | None |
Crankshaft Position Sensor Range Check during Cranking P0335:
CRANKSHAFT POSITION SENSOR RANGE CHECK DURING CRANKING P0335
| Starter | ON |
| Minimum battery voltage while starter ON | Less than 11 V |
Crankshaft Position Sensor Range Check during Engine Running P0335:
CRANKSHAFT POSITION SENSOR RANGE CHECK DURING ENGINE RUNNING P0335
| Engine speed | 600 rpm or more |
| Starter | OFF |
| Time after starter from ON to OFF | 3 seconds or more |