Torque Specifications
TORQUE SPECIFICATIONS - ENGINE MECHANICAL
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Spark plug at Cylinder head sub-assy | 18 | 184 | 13 |
| Ignition coil No. 1 at Cylinder head sub-assy | 9.0 | 92 | 80 in.lbf |
| Idler pulley assy at Engine mounting bracket | 40 | 408 | 30 |
| Camshaft at Camshaft bearing cap No.2 | 13 | 130 | 9.6 |
| No. 2 camshaft at Camshaft bearing cap No. 1 | 23 | 235 | 17 |
| Oil pump assy at Service hole screw plug | 15 | 153 | 11 |
| Brake reservoir bracket at Body | 8.5 | 87 | 75 in.lbf |
| Brake master cylinder reservoir sub-assy at Brake reservoir bracket | 8.5 | 87 | 75 in.lbf |
| Air cleaner assy at Cylinder head cover sub-assy | 7.0 | 71 | 62 in.lbf |
| Air cleaner assy at Intake manifold | 3.0 | 31 | 27 in.lbf |
| Battery negative terminal at Battery negative cable | 6.0 | 61 | 53 in.lbf |
| Engine hanger at Cylinder head sub-assy | 40 | 408 | 30 |
| E.F.I. water temperature sensor at Cylinder head sub-assy | 20 | 204 | 15 |
| Radio setting condenser at Cylinder head sub-assy | 9.0 | 92 | 80 in.lbf |
| Exhaust manifold at Cylinder head sub-assy | 27 | 275 | 20 |
| Exhaust manifold at Exhaust manifold heat insulator No. 1 | 8.0 | 82 | 71 in.lbf |
| Water bypass pipe No. 1 at Cylinder block sub-assy | 9.0 | 92 | 80 in.lbf |
| Water bypass pipe No. 1 at Cylinder head sub-assy | 9.0 | 92 | 80 in.lbf |
| Oil level gage guide at Intake manifold | 9.0 | 92 | 80 in.lbf |
| Flywheel at Crankshaft 1st | 49 | 500 | 36 |
| Flywheel at Crankshaft 2nd | Turn 90° | Turn 90° | Turn 90° |
| Transmission input damper assy at Fly wheel | 20 | 204 | 15 |
| Starter hole insulator at Hybrid vehicle transaxle assy | 32 | 326 | 24 |
| Engine mounting bracket RH at Engine mounting insulator RH | 52 | 530 | 38 |
| Engine mounting insulator bracket LH at Engine mounting insulator LH | 80 | 816 | 59 |
| Front suspension crossmember sub-assy at Body Bolt A | 113 | 1152 | 83 |
| Front suspension crossmember sub-assy at Body Bolt B | 157 | 1602 | 116 |
| Engine moving control rod at Front suspension crossmember | 56 | 571 | 41 |
| Engine moving control rod at Hybrid vehicle transaxle assy | 100 | 1020 | 74 |
| Steering sliding yoke sub-assy at Steering gear assy | 35 | 357 | 26 |
| Compressor assy at Cylinder block sub-assy | 25 | 255 | 18 |
| Vacuum switching valve assy No. 2 at Engine mounting insulator RH | 7.5 | 76 | 5.5 in.lbf |
| Air cleaner inlet No. 1 at Air cleaner case | 3.0 | 31 | 27 in.lbf |
| Front wheel at Front axle | 103 | 1050 | 76 |
| Oil pan sub-assy at Stud bolt | 5.0 | 51 | 44 in.lbf |
| Oil pan sub-assy at Cylinder block sub-assy | 24 | 245 | 18 |
| Oil pan sub-assy at Oil strainer sub-assy | 11 | 112 | 8.1 |
| Oil pan sub-assy at Oil pan sub-assy No. 2 | 9.0 | 92 | 80 in.lbf |
| Oil pan sub-assy No. 2 at Oil pan drain plug | 38 | 387 | 28 |
| Oil filter union at Oil pan sub-assy | 30 | 306 | 22 |
| Cylinder head sub-assy at Cylinder block sub-assy 1 st | 29 | 296 | 21 |
| Cylinder head sub-assy at Cylinder block sub-assy 2nd | Turn 90° | Turn 90° | Turn 90° |
| Cylinder head sub-assy at Cylinder block sub-assy 3rd | Turn 90° | Turn 90° | Turn 90° |
| Camshaft timing gear assy at Camshaft | 64 | 653 | 47 |
| Camshaft timing gear at No. 2 Camshaft | 64 | 653 | 47 |
| Chain vibration damper at Cylinder head sub-assy | 9.0 | 92 | 80 in.lbf |
| Chain vibration damper at Cylinder block sub-assy | 9.0 | 92 | 80 in.lbf |
| Chain tensioner at Cylinder block sub-assy | 9.0 | 92 | 80 in.lbf |
| Oil pump assy at Cylinder head & block Bolt A | 32 | 326 | 24 |
| Oil pump assy at Cylinder head & block Bolt B, C | 11 | 112 | 8.1 |
| Oil pump assy at Cylinder head & block Nut D | 24 | 245 | 18 |
| Oil pump assy at Cylinder head & block Bolt E | 24 | 245 | 18 |
| Crankshaft damper sub-assy at Crankshaft | 128 | 1305 | 95 |
| Water pump assy at Cylinder block sub-assy | 11 | 112 | 8.1 |
| Engine mounting bracket at Cylinder block sub-assy | 55 | 561 | 41 |
| Fuel delivery pipe sub-assy at Cylinder head sub-assy Bolt A | 19 | 194 | 14 |
| Fuel delivery pipe sub-assy at Cylinder head sub-assy Bolt B | 9.0 | 92 | 80 in.lbf |
| Cylinder head cover sub-assy at Cylinder head sub-assy | 10 | 102 | 7.4 |
| Ventilation valve sub-assy at Cylinder head cover sub-assy | 27 | 275 | 20 |
| Water pump pulley at Water pump assy | 15 | 153 | 11 |
| Crank position sensor at Oil pump assy | 7.5 | 76 | 66 in.lbf |
| Water inlet at Cylinder block sub-assy | 9.0 | 92 | 80 in.lbf |
| Camshaft timing oil control valve assy at Cylinder block sub-assy | 7.5 | 76 | 66 in.lbf |
| Cam position sensor at Cylinder head sub-assy | 8.0 | 82 | 71 in.lbf |
| Stud bolt at Cylinder head (See OVERHAUL ) Bolt A | 10 | 102 | 7.4 |
| Stud bolt at Cylinder head (See OVERHAUL ) Bolt B | 4.0 | 41 | 35 in.lbf |
| Stud bolt at Cylinder head (See OVERHAUL ) Bolt C | 10 | 102 | 7.4 |
| Stud bolt at Cylinder head (See OVERHAUL ) Bolt D | 9.0 | 92 | 80 in.lbf |
| Oil control valve filter plug at Cylinder head | 30 | 306 | 22 |
| w/Head taper screw plug No.1 at Cylinder head | 44 | 449 | 32 |
| Connecting rod cap at Connecting rod 1 st | 15 | 153 | 11 |
| Connecting rod cap at Connecting rod 2nd | Turn 90° | Turn 90° | Turn 90° |
| Bearing cap at Cylinder block 1 st | 22 | 224 | 16 |
| Bearing cap at Cylinder block 2nd | Turn 90° | Turn 90° | Turn 90° |
| Stud bolt at Cylinder block | 5.0 | 51 | 44 in.lbf |
| Stud bolt (For knock sensor) at Cylinder block | 11 | 112 | 8 |
| Cylinder block water drain cock plug at Cylinder block | 35 | 357 | 26 |