Service Data

Service Data - Front Suspension

Front wheel alignment	Vehicle height
		A-B:	95 mm (3.74 in.)
		D-C:	62 mm (2.40 in.)
	Toe-in (total)		0° ± 12' (0° ± 0.2°), 0 ± 2 mm (0 ± 0.08 in.)
		Rack end length difference	1.5 mm (0.059 in.) or less
	Wheel angle
		Inside wheel	40°35' (38°35' -- 42°35')
			40.58° (38.58' -- 42.58°)
		Outside wheel: Reference	34°15'
			34.25°
	Camber		-0°35' ± 45' (-0.58° ± 0.75°)
		Right-left error	45' (0.75°) or less
	Caster		3° 10' ± 45' (3.17° ± 0.75°)
		Right-left error	45' (0.75°) or less
	Steering axis inclination		12°35' ± 45' (12.58° ± 0.75°)
		Right-left error	45' (0.75°) or less
Front suspension	Lower ball joint turning torque		0.98 to 4.90 N.m (10 to 50 kgf.cm, 9 to 43 in..lbf)
Front suspension	Stabilizer link turning torque		0.05 to 1.96 N.m (0.5 to 20 kgf.cm, 0.4 to 17.4 in..lbf)
A: Ground clearance of front wheel center B: Ground clearance of lower arm No.1 set bolt center C: Ground clearance of rear axle carrier bush set bolt center D: Ground clearance of rear wheel center