Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | P0100 to P0103: MAF meter |
ECT Sensor Stuck at Low ECT:
TYPICAL ENABLING CONDITIONS (ECT SENSOR STUCK AT LOW ECT)
| Cumulative idle off period | 250 sec. or more |
| Speed increase by 30 km/h (19 mph) or more | 10 times or more |
| ECT | 35 to 60°C (95 to 140°F) |
| IAT | -6.7°C (20°F) or more |
ECT Sensor Stuck at High ECT:
TYPICAL ENABLING CONDITIONS (ECT SENSOR STUCK AT HIGH ECT)
| ECT | 60°C (140°F) or more | ||||
| IAT | -6.7°C (20°F) or more | ||||
| "Stop and go"(1) | Once or more | ||||
| "Steady driving and stop"(2) | Once or more | ||||
|
|||||