O2S Test Result

Refer to PRE-CHECK for detailed information.

Rear HO2S Voltage:

If the value is out of the standard value, the ECM interprets this as a malfunction and sets DTC.

O2S TEST RESULT (REAR HO2S VOLTAGE)

TEST ID	Description of TEST DATA	Conversion Factor	Unit	Standard Value
$07	Minimum rear HO2S voltage	N/A	V	Below 0.45 V
$08	Maximum rear HO2S voltage	N/A	V	0.6 V or more
$31	Time that rear HO2S output changes Lean to Rich	N/A	sec.	Below 3 sec.
$32	Time that rear HO2S output changes Rich to Lean	N/A	sec.	Below 3 sec.

Rear HO2S Slow Response:

If the time is out of the standard value, the ECM interprets this as a malfunction and sets DTC.

O2S TEST RESULT (REAR HO2S SLOW RESPONSE)

TEST ID	Description of TEST DATA	Conversion Factor	Unit	Standard Value
$37	Time until rear HO2S voltage drops to below 0.2 V after fuel-cut starting	N/A	sec.	Below 7 sec.

Rear HO2S Low Voltage:

If all the values ($81, $84, $85 and $87) are out of the standard values, the ECM interprets this as a malfunction and sets DTC.

O2S TEST RESULT (REAR HO2S LOW VOLTAGE)

TEST ID	Description of TEST DATA	Conversion Factor	Unit	Standard Value
$81	Percentage in monitor time where rear HO2S voltage is below 0.05 V	Multiply 0.3906	%	Within 60%
$84	Percentage in monitor time where rear HO2S voltage is 0.7 V or more	Multiply 0.3906	%	20% or more
$85	Continuous time that rear HO2S voltage is 0.45 V or more	Multiply 0.2621	sec.	20 sec. or more
$87	Percentage in monitor time where rear HO2S voltage is 0.45 V or more	Multiply 0.3906	%	40% or more