LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> ECM (2UZ-FE) >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM (2UZ-FE): Replacement

  1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.2 (See  REPLACEMENT  ) 
  2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSY (See  REPLACEMENT  ) 
  3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2 (See  REPLACEMENT  ) 
  4. REMOVE ECM 
    1. Disconnect the 5 ECM connector.
    2. Remove the 3 nuts and ECM.
    3. Remove the 2 screws and ECM bracket No. 1 from the ECM.
    4. Remove the 2 screws and ECM bracket No. 2 from the ECM.
      Fig 1: Removing ECM
      G04333453Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL ECM 
    1. Install the ECM bracket No. 2 with the 2 screws to the ECM.
    2. Install the ECM bracket No. 1 with the 2 screws to ECM.
    3. Install the ECM with the 3 nuts.

      Torque: 13 N.m (133 kgf.cm, 10 ft.lbf) 

    4. Connect the 5 ECM connector.
scientia non olet · About LEMON Manuals