ENGINE (w/ Smart Key System): Installation
- INSTALL ENGINE SWITCH
- Install the engine switch.
- Connect the engine switch connector.
- INSTALL INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1
- INSTALL INSTRUMENT PANEL FINISH LOWER PANEL LH
- INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
- INSTALL FRONT DOOR SCUFF PLATE LH
- CONNECT BATTERY NEGATIVE TERMINAL
- INSPECT SRS WARNING LIGHT
HINT:
See DIAGNOSIS SYSTEM
- PERFORM INITIALIZATION
HINT:
See INITIALIZATION
- Some systems need initialization when disconnecting the battery terminal.