Torque Specifications
WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
3MZ-FE LUBRICATION TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Oil pressure switch at Cylinder block | 15 | 152 | 11 | |
| Oil drain plug at Oil pump sub-assembly No.2 | 25 | 255 | 18 | |
| Oil pump assembly at Cylinder block | Bolt A | 8.0 | 82 | 71 in.*lbf |
| Bolt B | 20 | 199 | 14 | |
| Bolt C | 43 | 439 | 32 | |
| Crankshaft position sensor at Oil pump assembly | 8.0 | 82 | 71 in.*lbf | |
| Oil pan sub-assembly at Cylinder block | 10 mm head | 8.0 | 82 | 71 in.*lbf |
| 12 mm head | 20 | 203 | 15 | |
| 14 mm head | 37 | 379 | 27 | |
| Oil strainer sub-assembly at Main bearing cap | 8.0 | 82 | 71 in.*lbf | |
| Oil pan sub-assembly No.2 at Oil pan sub-assembly No.1 | 8.0 | 82 | 71 in.*lbf | |
| engine mounting bracket RH | Bolt A | 54 | 550 | 40 |
| Bolt B | 54 | 550 | 40 | |
| Bolt C | 43 | 439 | 32 | |
| Engine mounting insulator RH | Nut A | 95 | 969 | 70 |
| Nut B | 87 | 887 | 64 | |
| Engine mounting insulator FR | Bolt A | 87 | 887 | 64 |
| Nut B | 52 | 531 | 38 | |
| Oil level gage guide at Cylinder block | 8.0 | 82 | 71 in.*lbf | |
| Compressor mounting bracket No.1 at Cylinder block | 25 | 250 | 18 | |
| Timing belt idler sub-assembly No.1 at Cylinder block | 34 | 347 | 25 | |
| Compressor and magnetic clutch at Compressor mounting bracket | 25 | 250 | 18 | |
| Generator bracket No.2 at Transverse engine, engine mounting bracket | 28 | 286 | 21 | |
| Front suspension brace upper center at Body | 80 | 816 | 59 | |
| Oil pump cover at Oil pump | 10 | 105 | 8 | |
| Oil pump relief valve at Oil pump | 49 | 500 | 36 | |