LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Avalon XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System (3MZ-FE)) >> ECM >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 5 (Engine Control System (3MZ-FE)): ECM: Installation

WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ECM BRACKET NO. 2 
    1. Install the ECM bracket with the 2 screws.
      Fig 1: Installing ECM Bracket No. 2
      G04382703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ECM BRACKET 
    1. Install the ECM bracket with the 2 screws.
      Fig 2: Installing ECM Bracket
      G04382704Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL ECM 
    1. Install the 2 wire harness clamps.
    2. Connect the 5 ECM connectors.
    3. Install the ECM with the 2 nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

      Fig 3: Installing ECM
      G04382705Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL RH 
  5. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1 
  6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 
  7. INSTALL FRONT DOOR SCUFF PLATE RH 
  8. CONNECT BATTERY NEGATIVE TERMINAL 
  9. INITIALIZE SYSTEM 
scientia non olet · About LEMON Manuals