Service Data
WARNING: This page is about a different car, the 2005 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
Brake Specifications
| Brake pedal height (from asphalt sheet) | M/T: | 134.9 to 144.9 mm (5.311 to 5.703 in.) |
| A/T: | 136.0 to 146.0 mm (5.353 to 5.747 in.) | |
| Brake Pedal freeplay | 1.0 to 6.0 mm (0.039 to 0.236 in.) | |
| Stop lamp switch clearance | 0.5 to 2.4 mm (0.020 to 0.094 in.) | |
| Pedal reserve distance from asphalt sheet at 490 N (50 kgf, 110.2 lbf) | ||
| w/o ABS: | More than 78 mm (3.07 in.) | |
| w/ABS: | More than 76 mm (2.99 in.) | |
| w/VSC: | More than 76 mm (2.99 in.) | |
| Brake booster push rod clearance | -0.21 to 0 mm (-0.0083 to 0 in.) | |
| Front brake pad thickness | Standard | 11.0 mm (0.433 in.) |
| Minimum | 1.0 mm (0.039 in.) | |
| Front brake disc thickness | Standard | 25.0 mm (0.984 in.) |
| Minimum | 23.0 mm (0.906 in.) | |
| Front brake disc runout | Maximum | 0.05 mm (0.0020 in.) |
| Rear brake drum inside diameter | Standard | 200.0 mm (7.874 in.) |
| Maximum | 201.0 mm (7.913 in.) | |
| Rear brake shoe lining thickness | ||
| Standard (NUMMI/TMMC Made:) | 4.0 mm (0.157 in.) | |
| Standard (TMC Made:) | 4.4 mm (0.173 in.) | |
| Minimum | 1.0 mm (0.039 in.) | |
| Rear brake pad thickness | Standard | 10.0 mm (0.394 in.) |
| Minimum | 1.0 mm (0.039 in.) | |
| Rear brake disc thickness | Standard | 9.0 mm (0.354 in.) |
| Minimum | 7.5 mm (0.295 in.) | |
| Rear brake disc runout | Maximum | 0.15 mm (0.0059 in.) |