LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Component Testing >> Camshaft Timing Oil Control Valve Assembly >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Camshaft Timing Oil Control Valve Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE V-BANK COVER SUB-ASSEMBLY 
    1. Remove the 2 nuts, 2 bolts and V-bank cover.
  3. REMOVE INTAKE AIR CONNECTOR PIPE 
    1. Disconnect the 3 hoses.
    2. Remove the 2 bolts.
    3. Loosen the 2 clamp bolts and remove the intake air connector.
  4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 1: Removing Oil Control Valve
      G04435516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 2: Removing Camshaft Timing Oil Control Valve Assembly (For Bank 2)
      G04435517Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals