LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Matrix Base, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (1ZZ-FE) >> Ignition Switch >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch: Inspection

  1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Measure the ignition starter switch resistance.
      Fig 1: Measuring Ignition Starter Switch Resistance
      G04462445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Resistance 

      TESTER CONNECTION AND SPECIFIED CONDITION

      Switch Position Tester Connection Specified Condition
      LOCK - 10 kΩ or higher
      ACC 1 - 3 Below 1 Ω
      ON 1 - 2 - 3
      5 - 6      		 Below 1 Ω
      START 1 - 2
      4 - 5 - 6      		 Below 1 Ω

      If the result is not as specified, replace the ignition starter switch.

scientia non olet · About LEMON Manuals