Yaw Rate Sensor Communication Stop Mode: Description
YAW RATE SENSOR COMMUNICATION STOP MODE
| DTC No. |
DTC Detection Condition |
Trouble Area |
| U0123/62 |
- Skid control ECU terminal IG1 voltage is 10 V or more, and data is not received from the yaw rate sensor for more than 1 sec.
- Skid control ECU terminal IG1 voltage is 10 V or more, and data cannot be received from the yaw rate sensor more than once within 5 sec. This situation repeatedly occurs more than 10 times.
|
- Yaw rate sensor (internal malfunction)
- Power source circuit of yaw rate sensor
|
| U0124/95 |
- Skid control ECU terminal IG1 voltage is 10 V or more, and data is not received from the deceleration sensor for more than 1 sec.
- Skid control ECU terminal IG1 voltage is 10 V or more, and data cannot be received from the deceleration sensor more than once within 5 sec. This situation repeatedly occurs more than 10 times.
|
- Yaw rate sensor (internal malfunction)
- Power source circuit of yaw rate sensor
|