Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK THAT CD IS INSERTED PROPERLY 
   1. Check whether or not the CD is inserted upside down.

      OK: 

      CD is properly inserted. 

   NG: REPLACE DISC 

   OK: GO TO NEXT STEP 

2. CHECK DISC 
   1. Check that the disc is not deformed or cracked.

      OK: 

      No deformation or cracks on the disc. 

      Fig 1: Ensure CD Is Not Cracked Or Deformed

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NG: CHANGE DISC 

   OK: GO TO NEXT STEP 

3. CLEAN DISC 
   1. Disc cleaning
      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
         NOTE: Do not use a conventional record cleaner or anti-static preservative.
         Fig 2: Cleaning CD

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   GO TO NEXT STEP 

4. CLEAR DTC 
   1. Clear the DTCs (See DTC CHECK / CLEAR  ).

   GO TO NEXT STEP 

5. RECHECK DTC 
   1. Recheck for DTCs and check if the same trouble occurs again.

      OK: 

      Malfunction disappears. 

   OK: END 

   NG: GO TO NEXT STEP 

6. REPLACE DISC 
   1. Replace the disc with another and recheck.
      1. Replace the disc with another normal one.
      2. Clear the DTCs (See DTC CHECK / CLEAR  ).
      3. Recheck for DTCs and check if the same trouble occurs again.

         OK: 

         Malfunction disappears. 

   NG: REPLACE RADIO RECEIVER 

   OK: END