LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1ZZ-FE) - SFI System - Component Tests >> Knock Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        TESTER CONNECTION - SPECIFIED CONDITIONS

        Tester Connection Specified Condition
        1 (Ground) - 2 (Output) 120 to 280 k at 20°C (68°F)

        If the result is not as specified, replace the knock sensor.

        Fig 1: Inspecting Knock Sensor
        G04460487Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals