Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
TYPICAL MALFUNCTION THRESHOLDS
| Either of the following condition A or B is met: | - |
| A. Frequency of the following conditions (a) and (b) are met: | 5 times or more |
| (a) Engine RPM - target engine RPM | Below -100 rpm, or 200 rpm or more |
| (b) Vehicle condition | Stop after vehicle was driven by 6.25 mph (10 km/h) or more |
| B. Frequency of the following conditions (c) and (d) are met: | Once |
| (c) Engine RPM - target engine RPM | Below -100 rpm, or 200 rpm or more |
| (d) IAC airflow rate learning value | 0.43 L/sec or less, or 2.75 L/sec or more |