Torque Specifications
DRIVE SHAFT TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft*lbf | |
|---|---|---|---|---|
| Front wheel set nut | 103 | 1,050 | 76 | |
| Rear wheel set nut | 103 | 1,050 | 76 | |
| Manual transaxle oil drain plug | 39 | 400 | 29 | |
| Automatic transaxle fluid drain plug | 1ZZ-FE (2WD): | 18 | 178 | 13 |
| 1ZZ-FE (4WD): 2ZZ-GE: |
49 | 500 | 36 | |
| Transfer oil drain plug | 49 | 500 | 36 | |
| Bearing lock bolt | 1ZZ-FE (4WD): | 32 | 330 | 24 |
| 2ZZ-FE: | 64 | 650 | 47 | |
| Lower ball joint assembly front x Suspension arm sub-assembly lower No.1 | 89 | 908 | 66 | |
| Tie rod end sub-assembly x Steering knuckle | 49 | 500 | 36 | |
| Flexible hose and speed sensor front x Shock absorber assembly front | 29 | 296 | 21 | |
| Speed sensor front x Steering knuckle | 8.0 | 82 | 71 in.*lbf | |
| Front stabilizer link assembly x Shock absorber assembly front | 74 | 755 | 55 | |
| Front axle hub nut | 216 | 2,200 | 159 | |
| Disc brake dust cover front x Steering knuckle | 8.3 | 85 | 73 in.*lbf | |
| Lower ball joint assembly front x Steering knuckle | 103 | 1,050 | 76 | |
| Front axle assembly x Shock absorber assembly front | 220 | 2,243 | 162 | |
| Front disc brake caliper assembly x Steering knuckle | 107 | 1,089 | 79 | |
| Rear axle hub & bearing assembly x Rear axle beam | 61 | 622 | 45 | |
| Rear disc brake caliper assembly x Backing plate | 47 | 479 | 35 | |
| Rear axle hub & bearing assembly x Rear axle carrier sub-assembly | 56 | 571 | 41 | |
| Rear brake tube No.4 x Flexible hose | 15 | 153 | 11 | |
| Speed sensor rear x Rear axle carrier sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Rear axle shaft nut | 216 | 2,200 | 159 | |
| Rear stabilizer link assembly x Rear suspension arm assembly No.1 | 44 | 450 | 32 | |
| Rear axle carrier sub-assembly x Upper control arm assembly | 74 | 755 | 55 | |
| Rear axle carrier sub-assembly x Rear suspension arm assembly No.1 | 74 | 755 | 55 | |
| Parking brake cable assembly No.3 x Rear brake drum subassembly | 7.8 | 80 | 69 in.*lbf | |