Battery Plug: Inspection

INSPECT BATTERY PLUG
1. Check the resistance.
  1. Measure the resistance between the terminals.
    Standard resistance:
    
    10 kΩ or higher
    
    If the result is not as specified, replace the battery plug.
    
    Fig 1: Measuring Resistance Between Terminals
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the service plug grip to the socket.
  3. Measure the resistance between the terminals.
    Standard resistance:
    
    Below 1 Ω
    
    If the result is not as specified, replace the battery plug.
    
    Fig 2: Measuring Resistance Between Terminals
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002