DTC Check / Clear
- CHECK DTC
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON and turn the tester ON.
- Select the following menu items: BODY / POWER WINDOW / DTC.
- Check the DTC(s).
- CLEAR DTC
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON and turn the tester ON.
- Select the following menu items: BODY / POWER WINDOW / DTC / CLEAR.
- Press the YES button.
- Check that "DTCs are cleared" is displayed.NOTE: If any DTCs are output, troubleshoot those DTCs again.