Data List / Active Test

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch ON.
3. Read the DATA LIST.

   Power window regulator motor (Power window ECU) 

   POWER WINDOW REGULATOR MOTOR - READ DATA LIST CHART
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnosis Note
   P/W AUTO SW	Driver side power window auto UP / DOWN switch signal / ON or OFF	ON: Driver side power window AUTO switch operates OFF: Driver side power window AUTO switch does not operate	-
   D P/W UP SW	Driver side power window manual UP switch signal / ON or OFF	ON: Driver side power window UP switch operates OFF: Driver side power window UP switch does not operate	-
   D P/W DOWN SW	Driver side power window manual DOWN switch signal / ON or OFF	ON: Driver side power window DOWN switch operates OFF: Driver side power window DOWN switch does not operate	-
   GLASS POS - 1/4	Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.	-
   GLASS POS - 2/4	Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.	-
   GLASS POS - 3/4	Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.	-
   GLASS POS - OPEN	Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.	-

   Power window regulator master switch assembly 

   POWER WINDOW REGULATOR MASTER SWITCH REFERENCE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnosis Note
   P/W AUTO SW	Driver side power window auto UP / DOWN switch signal / ON or OFF	ON: Driver side power window AUTO switch operates OFF: Driver side power window AUTO switch does not operate	-

   Main body ECU 

   MAIN BODY ECU CHECK
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnosis Note
   COM D-DOOR MTR	Connection status between power window regulator motor assembly (driver door) and main body ECU / OK or STOP	OK: Connection Stop: No connection	-
   D DOR CTY SW	Driver side door courtesy switch signal / ON or OFF	ON: Driver door open OFF: Driver door closed	-
   P DOR CTY SW	Front passenger side door courtesy switch signal / ON or OFF	ON: Front passenger door open OFF: Front passenger door closed	-

HINT:

Performing the intelligent tester's Active Test allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch ON.
3. Performing the Active Test by following the prompts on the tester screen.

Power window regulator motor (Power window ECU) 

Main body ECU