Customize Parameters
WARNING: This page is about a different car, the 2010 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZING FUNCTION WITH TECHSTREAM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize.
- Select the setting by referring to the table below.WIRELESS DOOR LOCK
Display (item) Default Function Setting Wireless Control ON The function that turns the wireless door lock on or off. ON or OFF Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON or OFF Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds. ON or OFF Panic Function ON The function to operate the theft deterrent system by continuously pressing the panic switch on the transmitter for 0.8 seconds. ON or OFF Auto Lock Time 60 s The function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s, 60 s or 120 s Wireless Auto Lock ON This function turns the wireless auto lock function on or off. ON or OFF Wireless Buzzer Resp ON This function turns the wireless door lock buzzer response on or off. ON or OFF P/W Ope buzzer ON This function turns the wireless power window buzzer response on or off. ON or OFF Wireless Buzzer Vol Level7 This function changes the wireless door lock buzzer volume. Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0