DTC Check / Clear

WARNING: This page is about a different car, the 2010 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
HINT:
- When DTC B1650/23 is detected as a result of troubleshooting for the airbag system, troubleshoot the occupant classification system.
- Use the Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Check for DTCs by following the prompts on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
Clear DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Clear the DTCs by following the prompts on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.