LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Crankshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install the crankshaft position sensor with the bolt.

      Torque: 6.5 N*m (65 kgf*cm, 58 in.*lbf) 

    2. Connect the crankshaft position sensor connector.
  2. INSTALL ENGINE UNDER COVER NO.1 
    Fig 1: Installing Crankshaft Position Sensor With Bolt
    G04507029Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals