Camshaft Position Sensor: Installation

INSTALL CAMSHAFT POSITION SENSOR
Install the camshaft position sensor with the bolt and stud bolt

Torque: 7.5 N*m (80 kgf*cm, 66 in.*lbf)
INSTALL NO. 3 TIMING BELT COVER LH (See INSTALLATION )
INSTALL DRIVE BELT
(See INSTALLATION )

Fig 1: Installing Camshaft Position Sensor With Bolt And Stud Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FILL ENGINE COOLANT
(See REPLACEMENT )
CHECK ENGINE COOLANT FOR LEAKS
CHECK IGNITION TIMING
(See ON-VEHICLE INSPECTION )