Cruise Control Main Switch: Installation

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the cruise control main switch assembly with the 2 screws.
  Torque: 2.35 N*m (24 kgf*cm, 21 in.*lbf)
2. Connect the connector.
INSTALL STEERING PAD (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).
INSPECT STEERING PAD (See INSTALLATION )
INSPECT SRS WARNING LIGHT
(See PRECAUTION )

Fig 1: Locating Cruise Control Main Switch Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002