LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Avalon XLS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control System >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

  1. PROBLEM SYMPTOM CONFIRMATION 
    1. Inspect SET function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -/SET.
      4. After releasing the switch, check that the vehicle cruises at the set speed.
      Fig 1: Pushing Cruise Control Main Switch To SET (Inspect SET Function)
      G04830972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the ACC (ACCEL) switch.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -/SET.
      4. Check that vehicle speed increases while the cruise control main switch is pushed to +/RES, and that the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily push the cruise control main switch to +/RES and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (tap-up control).
      Fig 2: Pushing Cruise Control Main Switch To SET (Inspect ACC (ACCEL) Switch)
      G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Inspect the COAST function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -/SET.
      4. Check that vehicle speed decreases while the cruise control main switch is pushed to -/SET, and the vehicle cruises at the newly set speed when the switch is released.
        Fig 3: Pushing Cruise Control Main Switch To SET (Inspect COAST Function)
        G04830972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      5. Momentarily push the cruise control main switch to -/SET, and then immediately release it. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (tap-down control).
    4. Inspect the CANCEL function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -/SET.
      4. When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
        • Depressing the brake pedal
        • Moving the shift lever to any position except D (5th, and 4th gears)
        • Turning the main switch ON
        • Pulling the cruise control main switch to CANCEL
      Fig 4: Pushing Cruise Control Main Switch To SET (Inspect CANCEL Function)
      G04830975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Inspect the RES (RESUME) function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -/SET.
      4. Cancel the cruise control system according to any of the above operations (other than turning the main switch OFF).
      5. After pushing the cruise control main switch to +/ RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle drives at the set speed.
    Fig 5: Pushing Cruise Control Main Switch To SET (Inspect RES (RESUME) Function)
    G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals