Inspection Procedure

HINT:

• The sound may skip when driving on an unpaved road.
• Sudden temperature changes in the cabin will cause condensation inside the from playing.

1. CHECK CD
   1. Check the CD.

      OK: 

      The CD is clean. 

      HINT:

      If dirt is on the CD surface, wipe it clean with a soft cloth from inside to outside in a radial direction.

      NOTE: Do not use a conventional record cleaner or antistatic preservative.
   Fig 1: Cleaning Disc With Soft Cloth

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NG: CLEAN CD 

   OK: Go to Next Step 

2. CHECK CD 
   1. Check that the CD is not deformed or cracked.

      OK: 

      No deformation or cracks on the CD. 

   Fig 2: Identifying Cracked, Deformed, Scratched Discs

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NG: CD IS FAULTY 

   OK: Go to Next Step 

3. CHECK OPERATION USING ANOTHER CD 
   1. Check using another CD.
      1. Check if the problem recurs using another CD.

         OK: 

         The problem does not occur. 

   OK: CD IS FAULTY 

   NG: Go to Next Step 

4. CHECK RADIO RECEIVER 
   1. Check the radio receiver installation condition.
      1. Check that the radio receiver is properly installed.

         OK: 

         Radio receiver is properly Installed. 

   NG: REINSTALL RADIO RECEIVER PROPERLY 

   OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE