Service Data
SERVICE DATA
| POWER STEERING FLUID | ||
| Fluid level rise | Maximum | 5 mm (0.20 in.) |
| Fluid pressure at idle speed with valve closed | 7,300 to 7,800 kPa (75 to 80 kgf/cm2 , 1,067 to 1,138 psi) | |
| STEERING WHEEL | ||
| Steering effort at idle speed | (Reference) | 6.0 N*m (60 kgf*cm, 53 in.*lbf) |
| VANE PUMP ASSEMBLY | ||
| Vane pump rotating torque | 0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less | |
| Vane pump shaft and vane pump housing oil clearance | STD | 0.021 to 0.043 mm (0.0008 to 0.0017 in.) |
| Maximum | 0.043 mm (0.0017 in.) | |
| Vane plate thickness | Standard | 1.405 to 1.411 mm (0.0553 to 0.0556 in.) |
| Clearance between the rotor groove and plate | Maximum | 0.025 mm (0.0010 in.) |
| Spring free length | Minimum | 36.9 mm (1.453 in.) |
| RACK & PINION POWER STEERING GEAR ASSEMBLY | ||
| Steering rack runout | Maximum | 0.1 mm (0.004 in.) |
| Tie rod assembly stud bolt torque | (Turning) | 0.49 to 3.43 N*m (5.0 to 35.0 kgf*cm, 4.34 to 30.38 in.*lbf) |
| Total preload (Control valve rotating torque) | (Turning) | 1.0 to 1.8 N*m (10 to 18 kgf*cm, 8.6 to 15.7 in.*lbf) |
| Rack boot clamp clearance | 2.0 mm (0.079 in.) or less | |