Torque Specifications

TORQUE SPECIFICATIONS

Part Tightened		N*m	kgf*cm	ft*lbf
VANE PUMP ASSEMBLY
Vane pump housing rear x Vane pump housing front		22	224	16
Power steering oil pressure switch		21	214	16
Pressure port union sub-assembly		69	704	51
Power steering suction port union set bolt		12	122	9
Vane pump assembly x Pump bracket rear		37	377	27
Vane pump assembly set bolt		37	377	27
Pressure feed tube assembly x Vane pump assembly		41 (44)	418 (450)	30 (33)
Pressure feed tube assembly clamp set bolt		7.8	80	69 in.*lbf
RACK & PINION POWER STEERING GEAR ASSEMBLY
Engine hanger set bolt		38	390	28
Control valve housing set bolt		18	184	13
Control valve shaft lock nut		25	250	18
Rack housing cap		59	602	44
Rack guide spring cap lock nut		42 (59)	428(602)	31 (44)
Rack x Rack end sub-assembly		60 (83)	614 (850)	44 (62)
Turn pressure tube union nut		12(13)	120(130)	9(9)
Tie rod end sub-assembly lock nut		74	750	54
Rack & pinion power steering gear assembly set bolt		58	591	43
Steering intermediate shaft x Control valve pinion shaft		35	360	26
Front suspension crossmember sub-assembly x Frame	Bolt A	157	1, 600	116
Front suspension crossmember sub-assembly x Frame	Bolt B	113	1, 152	83
Crossmember x Engine mounting insulator RR		52	530	38
Center member x Frame	TMMC Made	69	612	44
Center member x Frame	TMC Made	39	398	29
Center member x Engine mounting insulator FR		52	530	38
Front suspension arm sub-assembly lower No. 1 x Lower ball joint		89	908	66
Front stabilizer link assembly set nut		74	755	55
Pressure feed tube assembly x Control valve housing		23 (25)	229 (250)	17(18)
Pressure feed tube clamp set bolt		7.8	80	69 in.*lbf
Tie rod end sub-assembly x Steering knuckle		49	500	36
Steering intermediate shaft assembly No. 2 set bolts		35	360	26
Front wheel set nut		103	1, 050	76

(): For use without SST