DTC Check/Clear

HINT

• When DTC B1650/23 is detected as a result of troubleshooting for the airbag system, troubleshoot the occupant classification system.
• Use the intelligent tester to read and clear DTCs, otherwise the DTCs cannot be read and cleared.

1. Check for DTCs.
   1. Connect the intelligent tester to the DLC3.
   2. Turn the ignition switch to the on position.
   3. Check for DTCs by following the prompts on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

2. Clear the DTCs.
   1. Connect the intelligent tester to the DLC3.
   2. Turn the ignition switch to the on position.
   3. Clear the DTCs by following the prompts on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

      Fig 1: Connecting Intelligent Tester To DLC3

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002