On-Vehicle Inspection

1. Check that the passenger side power window cannot be operated when the window lock switch of the power window regulator master switch is pressed.
2. Check that the passenger side power window can be operated when the window lock switch is pressed again.
   Fig 1: Identifying Power Window Regulator Master Switch (Window Lock Switch)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Check that the driver side power window operates as follows:

   OK: 

   MANUAL UP/DOWN FUNCTION
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON	Driver side	Pulled up	UP (closes)
   Ignition switch ON	Driver side	Pushed halfway down	DOWN (opens)

2. Check that the passenger side power window operates as follows:

   OK: 

   MANUAL UP/DOWN FUNCTION
   
   

   Condition	Regulator Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Passenger side	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Passenger side	Pushed down	DOWN (opens)

1. Check that the driver side power window operates as follows:

   OK: 

   AUTO DOWN FUNCTION
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON	Driver side	Fully Pushed down	AUTO DOWN (fully opens)

1. Check that the passenger side power window operates as follows:

   OK: 

   REMOTE UP/DOWN FUNCTION
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Passenger side	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Passenger side	Pushed down	DOWN (opens)

HINT:

PTC operation is a function that prevents overloading of the power window regulator by stopping the motor. PTC operation activates when the power window regulator switch is operated for a predetermined amount of time.

1. Pull up and hold the power window regulator switch for more than 90 seconds. Then release the switch.
2. Check that pressing the switch does not move the window.
3. Wait until 60 seconds have passed since the switch was released in the first step. Check that pressing the switch results in normal window movement.