System Outline

The door lock control is controlled through the various signal input into the body ECU through communication control of the body ECU etc.

1. Manual Unlock Operation 

   When the door lock control SW of the driver's or passenger's side door is pushed to UNLOCK, the door will unlock.

2. Manual Lock Operation 

   When the door lock control SW of the driver's or passenger's side door is pushed to LOCK, the door will lock.

3. Door Key Unlock Operation 

   * Unlock operation from driver's side door

   When the driver's side door is unlocked once using the ignition key, only the driver's side door is unlocked. If this operation is repeated within 3 seconds, all the other doors are unlocked.

   * Unlock operation from passenger's side door

   When the front passenger's side door is unlocked using the ignition key, all the other doors are unlocked, too.

4. Ignition Key Reminder Operation 

   When the door lock operation is made using the door knob with the ignition key remained inserted in the key cylinder and the door open, unlock operation is automatically made. Additionally, if lock operation is made with the door lock control SW or door key lock and unlock SW, unlock operation is automatically made after the lock operation has been completed.

5. Glass Hatch Opener Control 

   The glass hatch is opened when the back door key SW is kept on LOCK side for 0.8 second with the rear wiper in retracted condition.