Typical Enabling Conditions
ALL:
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | None |
P2111 (Throttle actuator stuck open):
DIAGNOSTIC PROCEDURE
| All of following conditions met | - |
| System guard* | ON |
| Throttle motor current | 2 A or more |
| Throttle motor close duty | 80% or more |
P2112 (Throttle actuator stuck closed):
DIAGNOSTIC PROCEDURE
| All of following conditions met | - |
| System guard* | ON |
| Throttle motor current | 2 A or more |
| Throttle motor open duty | 80% or more |
| *System guard set when following conditions met | - |
| Throttle motor | ON |
| Motor duty calculation | Executing |
| TPS fail determination | Fail determined |
| Motor current-cut operation | Not executing |
| Actuator power supply voltage | 4 V or more |
| Motor fail determination | Fail determined |