Front Shock Absorber With Coil Spring: Reassembly

INSTALL FRONT SHOCK ABSORBER BUSH
1. Using SST and a press, install a new absorber bush.
  SST 09710-22021 (09710-01071, 09710-01081)
  
  Fig 1: Identifying Front Absorber Bush With SST & Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT COIL SPRING
1. Using SST, compress the front coil spring.
  SST 09727-30021 (09727-00010, 09727-00031), 09727-00060
  
  NOTE: Do not use an impact wrench. It will damage SST.
2. Install the coil spring onto the shock absorber.
  HINT:
  
  Fit the lower end of the coil spring into the gap of the spring lower seat.
  
  Fig 2: Compressing Front Coil Spring Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SHOCK ABSORBER CUSHION RETAINER
INSTALL FRONT SUSPENSION SUPPORT SUB-ASSEMBLY
INSTALL FRONT SHOCK ABSORBER NO. 1 CUSHION
INSTALL FRONT SHOCK ABSORBER CUSHION RETAINER
INSTALL FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
1. Align the suspension support and the absorber bush.
  
  Fig 3: Aligning Suspension Support & Absorber Bush
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Fit and tighten a new lock nut.
  Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
  
  NOTE: Do not use an impact wrench. It will damage the shock absorber rod.
3. Release the coil spring while checking the position of the suspension support.