Cruise Control Main Switch: Installation
WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL CRUISE CONTROL MAIN SWITCH
- Install the switch with the 2 screws.
- Connect the connector.
- INSTALL STEERING WHEEL ASSEMBLY
- INSTALL STEERING PAD ASSEMBLY
- INSTALL NO. 2 STEERING WHEEL COVER LOWER
- INSTALL NO. 3 STEERING WHEEL COVER LOWER
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see INITIALIZATION
).
- CHECK SRS WARNING LIGHT
- Check the SRS warning light (see DIAGNOSIS SYSTEM ).