LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Highlander Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Cruise Control System) >> Cruise Control Main Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Main Switch: Removal

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE NO. 2 STEERING WHEEL COVER LOWER 
  3. REMOVE NO. 3 STEERING WHEEL COVER LOWER 
  4. REMOVE STEERING PAD ASSEMBLY 
  5. REMOVE STEERING WHEEL ASSEMBLY 
  6. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
    2. Remove the 2 screws and switch.
      Fig 1: Removing Cruise Control Main Switch
      G04475763Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals